TP-links Router Setup Guide.
TP-links wireless router installation guide, suitable for all models of tp-link dual-band routers as well as 11 end routers. To set up your hardware connection disconnect and power off your existing router if you don’t have one continue. The next step power on wait for two minutes for the modem to get online use an ethernet cable to connect your computer to one of the yellow ports on the router before you power on the router. Make sure the computer is not connected to any other wireless network power on the router and wait until the system LED flashes slowly.
The default Wireless name is tp-link underscore 2.4 gigahertz or 5 gigahertz with 6 letters and numbers behind it. The wireless password can be found on the label at the bottom of your router. To customize/set up the wireless network please follow the steps below.
- Open any internet browser like Edge, Chrome, Safari
- Type in tplinklogin.net t into the address bar a pop-up window will display to prompt you to
- Enter the username and password of the default User and the Password is admin and admin.
As soon we log in quick setup page will open, you will see two buttons, click on the next button. Next, choose operation mode will open. We are using router mode now but you can select as per your desire.
Let’s get you started in the admin panel go to quick setup to manually configure your internet connection and wireless settings. There are several connection types.
b) Dynamic IP is for cable modem connections and connections behind all-in-one modem routers
c) Static IP is for connections where your ISP provides you with specified IP parameters
d) PPPOE connections with a username and password provided by your internet service provider
Let’s take dynamic IP as an example assuming we’re using a cable modem or ADSL Modem. Plug a cable for the cable modem or ADSL Router into the blue WAN port. As soon you click next router will ask to reboot, reboot once. Congratulations you’ve completed the setup of your tp-link wireless router you can highlight and connect to the wireless network by inputting the wireless default password on the router's label. You can change your wireless password by clicking Wireless setting from left side menu.
